欢迎来到嘉祥同信环卫设备有限公司

当前位置:主页 > 新闻动态 > 公司新闻 >

怎么能够有效的防止三轮吸粪车漏油?

文章出处:http://www.txhw88.com/ 发表时间:2019-05-05
留意班轮的作用。三轮吸粪车静件之间的垫片(如接头端面、端盖、壳体、盖板、搪瓷盖板等)起着防漏密封的作用。假如资料、消费质量和装置不契合技术标准,就不能起到密封走漏的作用,以至发作事故。如油底壳或阀盖,由于接触面积大且不易紧固,形成漏油。
Pay attention to the role of liners. The gaskets between the static parts of the three-wheel dung suction truck (such as the end face of the joint, the end cover, the shell, the cover plate, the enamel cover plate, etc.) play the role of leak-proof sealing. If the data, consumption quality and equipment do not conform to the technical standards, they can not play the role of sealing leakage, or even accident. For example, oil pan or valve cover, due to large contact area and not easy to tighten, oil leakage is formed.
各种紧固螺母应按规则的扭矩拧紧。松懈的包装会渗漏;过紧和螺钉孔四周的金属凸出或螺钉螺钉打滑而形成漏油。此外,假如油底壳内的排油螺塞不拧紧或松动而零落,容易形成油品损失,进而发作瓦托轴损坏事故。
All kinds of fastening nuts should be tightened according to the regular torque. Loose packing leaks; overtightening and metal protrusions around screw holes or screw slippage cause oil leakage. In addition, if the discharging screw plug in the oil pan is not tightened or loosened and scattered, it is easy to cause oil loss, and then the damage accident of the bearing will occur.
及时改换失效的油封。三轮吸粪车上的许多运动部件(如油封、o型圈)由于装置不当,轴颈与油封刃口心、摆和油不一样。有些油封运用时间过长,会因橡胶老化而失去弹性。如发现走漏,应及时更新。
Replace the failed oil seal in time. Many moving parts (such as oil seal and o-ring) of three-wheel dung suction truck are different from the edge center, pendulum and oil of oil seal due to improper installation. Some oil seals will lose elasticity due to rubber aging if they are used too long. If leakage is found, it should be updated in time.
防止止回阀和排气阀梗塞。结果,箱体温度升高,油气充溢整个空间,排放不进来。因而,壳体内压力增大,光滑油耗费增加,改换周期缩短。发起机通风系统的梗塞增加了活塞阻力,增加了燃油耗费。由于箱内和箱外的压力差,常常形成密封单薄处的走漏。因而,需求定期检查三轮吸粪车,疏浚、清算。
二手吸粪车
Prevent check and exhaust valve obstruction. As a result, the temperature of the box rises, oil and gas fills the whole space, and can not be discharged. As a result, the pressure inside the shell increases, the consumption of smooth oil increases, and the replacement period shortens. The blockage of the ventilation system of the starter increases piston resistance and fuel consumption. Owing to the pressure difference between inside and outside the box, leakage often occurs in the thin part of the seal. Therefore, regular inspection of three-wheeled suction trucks is needed for dredging and liquidation.
正确处理各种油管接头密封问题。三轮吸粪车联轴器螺母经常拆装,容易滑断螺纹而松脱,会形成漏油。改换联轴器螺母,用磨削法处理其锥封,使螺母按下处理密封。
Correctly handle the sealing problems of various tubing joints. The coupling nuts of tricycle dung suction truck are often disassembled and assembled, which is easy to slip and loosen the threads and cause oil leakage. Change the coupling nut and grind the taper seal to make the nut press down to seal.
防止轮毂吊油。轮毂轴承和腔体光滑油脂过多,或其油封装配不当,质量差,老化失效;频繁制动招致轮毂温渡过高;轴螺母松动会惹起轮毂油。因而,应采用空腔光滑法(即恰当光滑)来疏浚通气孔。
Prevent hub oil lifting. Wheel hub bearings and cavity smooth grease too much, or its oil package mismatched, poor quality, aging failure; frequent braking causes the hub temperature too high; loose axle nuts will cause hub oil. Therefore, the cavity smoothing method (i.e. appropriate smoothing) should be used to dredge the ventilation holes.
本文由二手吸粪车整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.txhw88.com我们会有更多精彩内容等你查看。
This article is organized and published by the second-hand dung suction truck. Do you know something about these contents? For more information, please click on http://www.txhw88.com. We will have more wonderful content for you to check.

返回顶部