欢迎来到嘉祥同信环卫设备有限公司

当前位置:主页 > 新闻动态 > 常见问题 >

吸污车气门座的维修需要注意什么?

文章出处:http://www.txhw88.com/ 发表时间:2019-05-10
1、车库门的日常运用环境应坚持枯燥,不得处于湿润的环境中,电机的外表应坚持清洁,特别是进风口不得受尘土、纤维等杂质的障碍。
1. The daily operation environment of garage doors should be dry and not in a humid environment. The appearance of motors should be clean, especially the air intake should not be hindered by impurities such as dust and fibers.
2、保证车库门电机在运转过程中有良好的光滑。普通来说,车库门电机运转每5000小时左右,就要补充或改换光滑脂,若运转中发现轴承过热或光滑蜕变时,应及时液压或换光滑脂。改换光滑脂时,应先肃清旧的光滑油,并用汽油洗净轴承及轴承盖的油槽,然后将光滑脂填充在轴承内外圈之间的空腔的1/2处。
2. Ensure that the garage door motor has good smoothness in the operation process. Generally speaking, when the garage door motor runs every 5000 hours or so, it is necessary to replace or replace the smooth grease. If the bearing is found to be overheated or smooth degeneration in operation, it should be timely hydraulically or smoothly greased. When replacing the grease, the old grease should be removed first, and the oil groove of the bearing and bearing cover should be washed with gasoline, then the grease should be filled in one-second of the cavity between the inner and outer rings of the bearing.
3、一旦发现车库门电机运转的振动及噪声明显增大时,就阐明电机轴承的寿命已抵达极限,这时需求检查轴承的径向游隙能否到达相关数值,并及时改换新的电机轴承
3. Once it is found that the vibration and noise of motor running in garage doors increase significantly, it is clarified that the life of motor bearings has reached the limit. At this time, it is necessary to check whether the radial clearance of bearings can reach the relevant value and replace the new motor bearings in time.
二手吸粪车
4、当车库门电机的热维护连续发作振动时,必需要先查明毛病来自哪个方向,看电机还是超负荷或维护安装整定值太低的问题,待毛病消弭后,才干投入正常运转中。
4. When the thermal maintenance of the garage door motor is in continuous vibration, it is necessary to find out the direction of the fault first, to see whether the motor is overloaded or the setting value of maintenance and installation is too low, and to put it into normal operation after the fault is eliminated.
5、若车库门电机发作毛病,必需要拆卸时,轴伸端或非伸端处都能够取出转子。南昌明和倡议大家,假如没有必要卸下风扇时,选择从非轴伸端取出转子更为便当。若需求从定子中抽出转子时,应留意避免损坏定子的绕组或绝缘
5. If the garage door motor breaks down and needs to be disassembled, the rotor can be removed at the extension end or non-extension end of the shaft. Nanchang Minghe advocates that if it is not necessary to unload the fan, it is more convenient to remove the rotor from the non-axle extension end. If it is necessary to withdraw the rotor from the stator, care should be taken to avoid damaging the stator winding or insulation.
本文由二手吸粪车友情奉献.更多有关的知识请点击:http://www.txhw88.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is dedicated by the friendship of second-hand dung suction truck. For more knowledge, please click on: sincere attitude at http://www.txhw88.com. Provide you with comprehensive services. More relevant knowledge will be dedicated to you one after another. Please look forward to it.

返回顶部