全国服务热线
18254766999(微信同号)
联系我们 CONTACT US
联系我们


嘉祥同信环卫设备有限公司

联系人:黄经理

电话:18254766999

网站:https://www.txhw88.com

地址:山东省济宁市嘉祥县

公司资讯您现在的位置:首页>新闻动态>公司资讯>洒水车租赁后,水泵不能吸收进水的原因

洒水车租赁后,水泵不能吸收进水的原因

来源:https://www.txhw88.com 日期:2020-03-16 发布人:同信环卫小编 浏览量:

[导读]:  杨总前段时间尝试了租赁二手洒水车,但合作出现了一个小问题,让杨总有点心烦意乱,什么问题?那个洒水车的水泵不能吸水。  Mr Yang
  杨总前段时间尝试了租赁二手洒水车,但合作出现了一个小问题,让杨总有点心烦意乱,什么问题?那个洒水车的水泵不能吸水。
  Mr. Yang tried to rent a second-hand sprinkler some time ago, but there was a small problem in the cooperation, which made Mr. Yang a little upset. What's the problem? The water pump of the sprinkler can't absorb water.
  洒水车水泵不能吸水的主要问题:
  The main problems of the sprinkler water pump not absorbing water:
  一:更可能的问题是喷头过滤器堵塞,因为洒水器不能放入干净的自来水都是水,可能是肮脏的池,池塘的水,所以水杂质太多,过滤很容易被碎片,如沙子、塑料袋。只需将滤网中的滤芯取出清洗干净,即可恢复正常工作。该屏幕位于喷灌机附近。
二手洒水车
  1: The most likely problem is that the sprinkler filter is blocked, because the sprinkler can't put clean tap water into the water, which may be dirty pool or pond water, so there are too many water impurities, so the filter is easy to be broken, such as sand and plastic bags. Just take out the filter element in the filter screen and clean it, then it can return to normal operation. This screen is located near the sprinkler.
  第二:可能是洒水泵压力不够,导致洒水泵不能泵水,通常是由两个原因引起的:
  Second, it may be that the pressure of the sprinkler pump is not enough, which leads to the failure of the sprinkler pump to pump water, which is usually caused by two reasons:
  1. 叶轮流道或吸入管道堵塞,或叶轮磨损、损坏。
  1. Impeller passage or suction pipe is blocked, or impeller is worn or damaged.
  2. 动力不足,速度过低。如果叶轮损坏则需要更换泵,动力不够,只需踩上气体即可。
  2. Insufficient power, low speed. If the impeller is damaged, the pump needs to be replaced. The power is not enough. Just step on the gas.
  以上是二手洒水车厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.txhw88.comThe above is the relevant content introduced by the second-hand sprinkler manufacturer. To learn more, please visit the website: https://www.txhw88.com
相关推荐:
相关新闻: