[导读]： 洒水车的保养方法： Maintenance method of sprinkler: 一、光滑系统的深化保养 1、 Further maintenance of smooth
Maintenance method of sprinkler:
1、 Further maintenance of smooth system
The main function of the smoothing system is to stop the effective smoothing of the various components of the sprinkler engine, so as to prevent excessive wear. Under normal conditions, the sprinkler needs to be cleaned and maintained once every 5000km-10000km. In case of excessive noise of the starter, weak acceleration and high water temperature, it also needs to be cleaned and maintained once. Clean the sludge and other deposits inside the engine, prevent the oxidation and thickening of the engine oil under high temperature, reduce the wear of the engine parts, extend the life of the engine, and improve the engine power.
2、 Cleaning and maintenance of cooling system
Under normal conditions, the sprinkler car should be cleaned once in winter and summer when changing seasons. During normal driving, it should be cleaned once every six to eight months, or once in case of high water temperature, water leakage or boiling. Eliminate the traces and scale that cause overheating of the engine, avoid harmful corrosion attack, prevent and stop the leakage of seals and water tanks, and completely replace the old coolant.
3、 Cleaning of fuel system (i.e. cleaning nozzle and valve carbon deposit)
Under normal conditions, the small sprinkler needs to be cleaned once every 800km-1000km, or once when you notice that the engine is panting, sluggish and poor acceleration, black smoke, powerless and fuel consuming. Remove the gum and carbon deposit in the system, avoid harmful corrosion, prevent and stop the leakage of seals and water tanks, and completely replace the old coolant.
4、 Gearbox cleaning
Under normal conditions, the sanitation sprinkler shall be cleaned once every 800km-1000km, or once in case of gearbox slipping, high water temperature, slow shifting and system leakage. Eliminate harmful sludge and paint film accumulation, restore the elasticity of sealing gasket and O-ring, make gearbox shift smooth, improve power output, and completely replace the old automatic gearbox oil.
The above is about the maintenance method of sprinkler. It's contributed by the second-hand sprinkler. If you want to know more, please consult https://www.txhw88.com Website.